What types of surfaces can a Sprinter mark?
Porous (paper, cardboard, etc.) and non-porous(metal, plastic, etc.)
Are the inks used in Sprinter models quick drying?
Yes, generally within 1 to 2 seconds dry to touch on most non-porous surfaces, quicker on porous surfaces.
Do you offer optional equipment?
Yes, a range of auxiliary equipment as well as operating supplies are available.
Can Sprinter models do upside down marking?
Any orientation is possible; if an orientation requires the ink to feed against gravity, a wick is used in the reservoir to assist ink flow.
What size of rubber type can be used?
A range of type heights are available, 1/16" to 1/4" is commonly used, but larger sizes are available.
What are typical delivery terms?
Most items are shipped on a 7 to 10 day basis; however overnight service is available on all standard machines, auxiliary equipment, as well as operating supplies. Overnight service is an additional charge and subject to inventory at the time of order placement.
How fast can a Sprinter run?
Speeds range in CPM (cycles per minute) 150 to 350 depending on model selected, surface being marked, etc..
What do I need to run a Sprinter?
At a minimum 20psi (40psi for model 22/28) air supply, a four-way valve, and a signal to switch the valve.
What diameter dot can a Sprinter mark?
On a model 22 (1/8"-1/4"), model 44 (1/8"-3/8"). Larger diameter dots are available but may require a model 66 or larger.
What about marking non-flat surfaces?
In most cases, after a sample part evaluation, non-flat surfaces can be accommodated with a custom marking head.
What ink colors are available?
White, Black, Red, Green, Grass Green, Lime Green, Brown, Tan, Blue, Light Blue, Pink, Purple, Violet, Orange, Silver-Gray, and Yellow.
How many marks will I get per bottle of ink?
On a model 66 typically 125,000 imprints of an average length message. Average number of imprints varies with message size and model selection.
How long will the Sprinter unit last?
Under normal operating conditions, the units are designed to deliver several million cycles, with minimal maintenance.
Do Ink Wicks Wear Out?
The good news: Ink wicks do not typically deteriorate or break down.
Instead, what happens over time is a gradual accumulation of pigment within the wick material. This buildup can slightly restrict ink flow, leading to slower delivery rates.
This is a performance issue — not a structural failure.
When Should You Replace an Ink Wick?
You may consider replacing your wick if you notice:
- Slower ink saturation at the print head
- Inconsistent marking density
- Extended time required for ink delivery
- Visible pigment buildup that affects performance
If your system is still delivering consistent marks and proper ink flow, replacement is likely unnecessary.